Installing Network Simulator 2 (NS2) on Ubuntu 14.04

1 Introduction

Network simulators are tools used to simulate discrete events in a network and which helps to predict the behaviours of a computer network. Generally the simulated networks have entities like links, switches, hubs, applications, etc. Once the simulation model is complete, it is executed to analyse the performance. Administrators can then customize the simulator to suit their needs. Network simulators typically come with support for the most popular protocols and networks in use today, such as WLAN,UDP,TCP,IP, WAN, etc.

Most simulators that are available today are based on a GUI application like the NCTUNS while some others incl. NS2 are CLI based. Simulating the network involves configuring the state elements like links, switches, hubs, terminals, etc. and also the events like packet drop rate, delivery status and so on. The most important output of the simulations are the trace files. Trace files log every packet, every event that occurred in the simulation and are used for analysis. Network simulators can also provide other tools to facilitate visual analysis of trends and potential trouble spots. Most of the simulation is performed in discrete time intervals where events that are in the queue are processed one after the other in an order.

Since simulation is a complex task, we cannot guarantee that all the simulators can provide exact or accurate results for all the different type of information. Examples of network simulators are: ns, NCTUNS, NetSim, etc.

ns2 is a name for series of discrete event network simulators like ns-1, ns-2 and ns-3. All of them are discrete-event network simulators, primarily used in research and teaching. ns2 is free software, publicly available under the GNU GPLv2 license for research, development, and use.

This post deals with the installation of “ns2” also called the “network simulator 2” in Ubuntu 14.04.

2 Download and Extract ns2

Download the all in one package for ns2 from here

The package downloaded will be named “ns-allinone-2.35.tar.gz”. Copy it to the home folder. Then in a terminal use the following two commands to extract the contents of the package.:

cd ~/
tar -xvzf ns-allinone-2.35.tar.gz

All the files will be extracted into a folder called “ns-allinone-2.35”.

3 Building the dependencies

Ns2 requires a few packages to be pre installed. It also requires the GCC- version 4.3 to work correctly. So install all of them by using the following command:

sudo apt-get install build-essential autoconf automake libxmu-dev

One of the dependencies mentioned is the compiler GCC-4.3, which is no longer available, and thus we have to install GCC-4.4 version. The version 4.4 is the oldest we can get. To do that, use the follwoing command:

sudo apt-get install gcc-4.4

The image below shows the output of executing both the above commands. If you have all the dependencies pre-installed, as I did, the output will look like the image below:

Once the installation is over , we have to make a change in the “ls.h” file. Use the following steps to make the changes:

Navigate to the folder “linkstate”, use the following command. Here it is assumed that the ns folder extracted is in the home folder of your system.

cd ~/ns-allinone-2.35/ns-2.35/linkstate

Now open the file named “ls.h” and scroll to the 137th line. In that change the word “error” to “this->error”. The image below shows the line 137 (highlighted in the image below) after making the changes to the ls.h file.To open the file use the following command:

gedit ls.h

Save that file and close it.

Now there is one more step that has to be done. We have to tell the ns which version of GCC will be used. To do so, go to your ns folder and type the following command:

Sudo gedit ns-allinone-2.34/otcl-1.13/

In the file, change Change CC= @CC@ to CC=gcc-4.4, as shown in the image below.


For installation, usage and  more, read my full story here.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s